Search results for "thermal diffusivity"
showing 10 items of 85 documents
The 3D structure of fabric and its relationship to liquid and vapor transport
2004
Polymeric carrier fabrics are commonly used in many industrial processes including manufacture of paper and board. Apart from acting as a carrier for the compressible porous material during the manufacturing process, the synthetic woven fabrics comprising mainly of poly ethylene terypthalate (PET) yarns, impart valuable product attributes, i.e. softness, bulk, absorbency, etc. in consumer products. The three-dimensional structure of the fabrics plays a critical role in deciding the manufacturing and energy efficiency as well as product end-use properties. X-ray micro computed tomography (X-CT) provides a non-intrusive technique to visualize and analyze the three-dimensional structure of por…
Migration kinetics of ion-implanted beryllium in glassy carbon
2008
Abstract Migration kinetics of low-concentration implanted 7 Be in glassy carbon has been studied by the modified radiotracer technique at temperatures 1285 °C and 1340 °C. The annealed sample concentration profiles show two distinctive components: (i) Main profile broadening assigned to beryllium trapping in defects during annealing. (ii) Tail parts on both sides of the profile maximum related to faster migration. Of the latter the profile representing bulk diffusion lies on the region free of defect influence and is well described by concentration-independent diffusivity. The features of the concentration profile broadening towards the sample surface indicate partial Be trapping in defect…
Electrical and thermomechanical properties of CVI- Si3N4 porous rice husk ash infiltrated by Al-Mg-Si alloys
2017
Abstract The effect of following processing parameters on the electrical and thermomechanical properties of Al/Si3N4 deposited silica composites was investigated using the Taguchi method and analysis of variance (ANOVA): infiltration temperature and time, atmosphere, effect of Si3N4 coating, porosity content in the preforms, and magnesium content in the alloy. The contributions of each of the parameters to modulus of elasticity, electrical resistivity, coefficient of thermal expansion (CTE), and thermal diffusivity of the resulting composites were determined. The maximum modulus of elasticity and electrical resistivity of obtained composites were 265 GPa, and 1.37 × 10−3 Ω m, respectively. …
Long-term moisture absorption and durability of FRP pultruded rebars
2021
Abstract Up to 15-years long moisture diffusion into carbon, glass, and aramid fiber reinforced plastic (FRP) rebars is studied. To eliminate uncertainties in identification of the radial and axial diffusivities, a successive methodology for determination of the diffusion coefficients is proposed. The concept of apparent diffusivity taking into account anisotropy and edge effects is extended to cylindrical samples. The ratio of the axial and radial diffusivities is the lowest for carbon (3) and the highest for glass (81) FRP rebars. Durability performance of the rebars is estimated by monitoring their interlaminar shear strength (ILSS). Long-term exposure of FRP rebars in a humid environmen…
Heat in Metal Cutting
2008
This chapter provides comprehensive knowledge regarding thermal effects during the cutting process with both uncoated and coated cutting tools. Main heat sources and flowing heat fluxes into the tool, chip and workpiece are characterized and quantified. The heat distribution models that allow the analytical prediction of heat partition between the tool and the chip are specified. They consider such thermal properties as specific heat, thermal conductivity and diffusivity, Peclet thermal number, and heat transmission ratio, all as functions of temperature. Finite element method and finite difference method simulations applied to the prediction of temperature fields are outlined for turning a…
The effects of water absorption and salt fog exposure on agglomerated cork compressive response
2022
The replacement of synthetic foams with agglomerated cork in sandwich composites can meet the increasing environmental concerns. Its peculiar morphology and chemical composition lead to outstanding dimensional recovery that endorsed a broad investigation of its compressive behavior. The knowledge of neat material response is fundamental to obtain a reliable design dataset, but it is necessary to consider all the environmental factors (water, moisture and sunlight) that significantly modify material mechanical properties. In view of this, the present work investigates the effect of distilled and seawater absorption and salt fog exposure on the compressive behavior of two agglomerated corks w…
Self-diffusion of silicon in molybdenum disilicide
2004
The self-diffusion of silicon in single crystal MoSi2 was studied by means of a radiotracer technique using the short-lived radioisotope 31Si (half-life ), which was produced and implanted into the samples at the ion-guide isotope separator on-line device at the University of Jyvaskyla in Finland. Diffusion annealing and subsequent serial sectioning of the specimens were performed immediately after the radiotracer implantation. In the entire temperature region investigated (835–1124 K), the 31Si diffusivities in both principal directions of the tetragonal MoSi2 crystals obey Arrhenius laws, where the diffusion perpendicular to the tetragonal axis is faster than parallel to it. In previous s…
Temptative Modeling of Surface Reactivity with Oxidizing-Reducing Mixtures on Rutile TiO2-δ
1989
Rutile bears some unique features in regard to oxygen transfer with the outer atmosphere, at high temperatures. It possesses very high chemical diffusivity. This diffusivity becomes apparent while performing reequilibration experiments in a final atmosphere of pure oxygen. Conversely, the oxidizing-reducing reaction with CO/CO2 mixtures at the rutile surface is always a slow process.
Halogen diffusion in a basaltic melt
2007
Abstract The diffusion of the halogens fluorine, chlorine and bromine was measured in a hawaiitic melt from Mt. Etna at 500 MPa and 1.0 GPa, 1250 to 1450 °C at anhydrous conditions; the diffusion of F and Cl in the melt was also studied with about 3 wt% of dissolved water. Experiments were performed using the diffusion-couple technique in a piston cylinder. Most experiments were performed with only one halogen diffusing between the halogen-enriched and halogen-poor halves of the diffusion couple, but a few experiments with a mixture of halogens (F, Cl and Br) were also performed in order to investigate the possibility of interactions between the halogens during diffusion. Fluorine and chlor…
Distributions of oxygen, nutrient, and metabolic waste concentrations in multicellular spheroids and their dependence on spheroid parameters.
1991
The distribution of oxygen, nutrients and metabolic wastes in multicellular tumor spheroids and its dependence on the parameters characterizing the spheroid (i.e., spheroid geometry, diffusivity, and consumption/production rates of biological substances) have been investigated by a theoretical analysis: 1. Parameter dependence is qualitatively demonstrated and visualized. 2. Reduction of the number of variables by specific coordinate transformations made it possible to generate nomograms from which concentration distributions for any choice of parameter values may easily be obtained. In particular, these nomograms may also be used for estimating concentration profiles of metabolic waste pro…